Model # 96 S Stainless w/Wood
This 96"diameter stairway is made out of # 304 grade stainless
steel material with birch wood. The stair has a special rail
system; the outside handrail is 42" from the tread nosing up
to the top of the handrail with an inside grab rail 36" from
the nosing to the top of the grab rail. Both handrails are made
out of 1 1/2" round, 16 gauge, stainless steel tubing. The intermediate
rails, spaced less than 4" apart, are made of 3/4" rd solid
stainless steel rod. This stairway has two posts at every quarter
turn. The posts are made out of 1/2"x 2" stainless steel bar
spaced 2" apart. The treads and landing are made out of 3/16"
stainless steel bent pan type with a 1" birch wood overlay with
nosing. This model has rail on both sides of the landing with
the outer rail at 42" high and the inner grab rail at 36" high.
The center column is a 6" ID schedule 40 round pipe. All of
the stainless steel material has a # 4 brush finish with the
wood finish done by others.