1-800-231-0793 / 713-680-3110
Our aluminum stairways will add architectural interest to any residential, commercial or industrial project. The all aluminum spiral stairway is built around a 4" or 6 5/8" OD sch-40 center column which meets or exceeds most building codes. We use the highest grade of aluminum to manufacture our spiral stairs. Our standard fully assembled aluminum stairs are built with a 3/16" thick checker plate tread with a matching landing platform.
The handrail is a 1 ½" round diameter tubing and the main balusters are a 1" square with 1/8" wall thickness. If your stair has to meet any building codes we will add extra center balusters to achieve a minimum of 4" spacing between balusters. The center column comes with ¼" x 10" round weld on base plate. Each stair comes in one section or spliced if desired by the customer, which bolts back together with the supplied hardware included. No welding is required. The standard finish on our aluminum stairs is a mill finish. Other finishes are available upon request
Our kit stairways are made with the same high quality materials as the fully assembled stairs. The difference between the welded fully assembled stairs and our kit stairs is that the kit can be easily taken to a hard to get place where a fully assembled stair could not be installed. We can also meet any building code if required in your area. Each stair comes disassembled in a box with all of the components and hardware required to reassemble. Instructions are included no specialty tools are needed to assemble.
Options available: any diameter, degree, smooth plate treads, wood overlays, balusters, different top rails, landings and railings, or tell us what you want.
We guarantee all workmanship and material against defects and to be exactly as represented and of the highest quality.